SOME PROBLEM AND SOLUTION OF.......................................
DISH TV STB
1.Power cycle
Most of the problems can be resolved by power cycling. STB power cycling means removing the main supply cord from the socket and reinserting it after few seconds.
2.101 - No Access – All channels/ Few channels
Check if the channel is available in the subscribed package.
Thereafter, check the recharge date, if expired then recharge and keep the STB on 550.
If the payment is made and problem still persists, then Power Cycle the STB.
Incase the problem lingers, call dishtv customer care & request for re-activation.
To gain access to the channel which is not in the package, please call customer care and subscribe for the same.
3.201 - Card Refresh Error
Re-insert the VC properly.
If still the problem contact your nearest dealer
4.301 - Signal not found
Power cycle the STB.
Check if the STB is properly connected to the Dish antenna.
If the problem still persists, contact your dishtv Service Agent.
5.302 – Signal Unavailable
This is a temporary problem.
Power cycle the STB.
Incase the problem is still there, contact your dishtv Service Agent.
6.303 - Re-install services
Power cycle the STB.
Reinstall the STB by pressing “OK” on the remote and then EXIT to save the settings.
Incase the problem is still there, contact your dishtv Service Agent.
7.401 - Please insert Viewing Card (VC)
Insert the VC if it is not installed.
If the VC is intalled then reinstall it.
8.402 - Please check the Viewing Card
Please insert the VC properly with the correct chip facing upward / downward as per instruction on the STB.
Incase the problem is still there, contact your dishtv Service Agent.
9.No access on MOD
501 – Conditional access
This is a temporary problem.
Power Cycle the STB.
Incase the problem is still there, contact your dishtv Service Agent.
Recharge your dishtv account to avail uninterrupted services.
Check for Financial Transaction (FT) / subscription due date.
If expired then recharge your subscription.
10.No Access on a TV channel.
Check that if the channel is in your package.
If it is, then do Channel Search or call Customer Care.
Goto>MAIN MENU>SETTINGS>STB INFO>OK>SETUP>press OK>HOME FREQUENCY> OK>(it shows the list of transports)>enter code: 7531 >it shows:frequency(MHz)------12688(this is the dishtv's home TP)>change it to 10990 (it is the dd direct+ home TP)> OK> BACK>LNB SETUP>it shows:LNB Hi frequency(MHz)--------10600(distv's)>change it to 09750 (dd direct's)or 13700(sun dth's)>OK>EXIT> THEN IT'S LOADING>THEN GO TO CHANNEL SEARCH it givesTV CHANNELS:39 and AUDIO Channels:12 TP:3
if u r not satisfied ;then again change the home TP from 10990 to 11490;then after channel search, it shows TV CHANNELS:20 and AUDIO Channels:12 TP:2
Totally u can watch TV CHANNELS:59 and AUDIO Channels:24 TP:2
totally TP:5
Now u can get 52+ channel free with this hack.
Do according to below steps:- 1) ON DTH after 1pm.Now go to menu and click
parental control.Then lock channel which you want(dont lock all) with 85660009
password. 2) now save it and go to home screen.Then go to airtel advertise page
(0 or 99) watch 2to3 min.then off it. 3) ON dth. It take time to start.when it
start remove card from box.Again go to parental control and remove lock.now OFF
dth. Add card restart it and watch FREE. IT WORK FOR ONLY MIDNIGHT. DO NOT PUT
ANOTHER PASSWORD,IF U PUT YOUR DTH BOX IS BLOCKED AND U WANT TO DELETE ALL
SOFTWARE.
Most of the problems can be resolved by power cycling. STB power cycling means removing the main supply cord from the socket and reinserting it after few seconds.
2.101 - No Access – All channels/ Few channels
Check if the channel is available in the subscribed package.
Thereafter, check the recharge date, if expired then recharge and keep the STB on 550.
If the payment is made and problem still persists, then Power Cycle the STB.
Incase the problem lingers, call dishtv customer care & request for re-activation.
To gain access to the channel which is not in the package, please call customer care and subscribe for the same.
3.201 - Card Refresh Error
Re-insert the VC properly.
If still the problem contact your nearest dealer
4.301 - Signal not found
Power cycle the STB.
Check if the STB is properly connected to the Dish antenna.
If the problem still persists, contact your dishtv Service Agent.
5.302 – Signal Unavailable
This is a temporary problem.
Power cycle the STB.
Incase the problem is still there, contact your dishtv Service Agent.
6.303 - Re-install services
Power cycle the STB.
Reinstall the STB by pressing “OK” on the remote and then EXIT to save the settings.
Incase the problem is still there, contact your dishtv Service Agent.
7.401 - Please insert Viewing Card (VC)
Insert the VC if it is not installed.
If the VC is intalled then reinstall it.
8.402 - Please check the Viewing Card
Please insert the VC properly with the correct chip facing upward / downward as per instruction on the STB.
Incase the problem is still there, contact your dishtv Service Agent.
9.No access on MOD
501 – Conditional access
This is a temporary problem.
Power Cycle the STB.
Incase the problem is still there, contact your dishtv Service Agent.
Recharge your dishtv account to avail uninterrupted services.
Check for Financial Transaction (FT) / subscription due date.
If expired then recharge your subscription.
10.No Access on a TV channel.
Check that if the channel is in your package.
If it is, then do Channel Search or call Customer Care.
IF YOUR DISHTV STB CHANNEL LOCK WITH PIN CODE
Now goto these stepes
MENU
OK.
Then set-top box screen will button, and go toRestore factory setting.
Reset the settings and search the channels using
MENU
SETTINGS
CHANNEL
SEARCH.
All channels will u can watch without Knowing pin code enjoy.
MENU
OK.
Then set-top box screen will button, and go toRestore factory setting.
Reset the settings and search the channels using
MENU
SETTINGS
CHANNEL
SEARCH.
All channels will u can watch without Knowing pin code enjoy.
SEE FREE CHANNELS IN DISH TV STB AFTER DEACTIVE
PROCEDURE:Goto>MAIN MENU>SETTINGS>STB INFO>OK>SETUP>press OK>HOME FREQUENCY> OK>(it shows the list of transports)>enter code: 7531 >it shows:frequency(MHz)------12688(this is the dishtv's home TP)>change it to 10990 (it is the dd direct+ home TP)> OK> BACK>LNB SETUP>it shows:LNB Hi frequency(MHz)--------10600(distv's)>change it to 09750 (dd direct's)or 13700(sun dth's)>OK>EXIT> THEN IT'S LOADING>THEN GO TO CHANNEL SEARCH it givesTV CHANNELS:39 and AUDIO Channels:12 TP:3
if u r not satisfied ;then again change the home TP from 10990 to 11490;then after channel search, it shows TV CHANNELS:20 and AUDIO Channels:12 TP:2
Totally u can watch TV CHANNELS:59 and AUDIO Channels:24 TP:2
totally TP:5
Airtel Digital Channel hacked
Disable D2H Logo..
THIS PROCESS CAN BE POSSIBLE
Go to Menu > Setting > User Setting (Password 1234 - by default) > TV setting > Satellite Management (Password > 4th, 6th, 8 & 10 digit of ur vc no.)
Now come to frequencies (e.g. 11483 / etc.) > Enter > (there are 5/6 TPs & repeat next action to each TP)
Press Red button > click ok to message > move to next tp > After all tp's services deleted press Exit.
Now if you press channel + / - there will no any channel. Now press few buttons in any order while you dont see D2H logo there.
Click Program Guide & Esc > Press OK / Info alternately > When there logo will not found on pressing OK (at time of channel list shows on press ok bttn) or when you press menu. (Check this thing at least 3-4 times) After you confirm the logo is disable again go to satellite management > scan channels > save those & Press exit. Now the logo will disable.
THIS PROCESS CAN BE POSSIBLE
Go to Menu > Setting > User Setting (Password 1234 - by default) > TV setting > Satellite Management (Password > 4th, 6th, 8 & 10 digit of ur vc no.)
Now come to frequencies (e.g. 11483 / etc.) > Enter > (there are 5/6 TPs & repeat next action to each TP)
Press Red button > click ok to message > move to next tp > After all tp's services deleted press Exit.
Now if you press channel + / - there will no any channel. Now press few buttons in any order while you dont see D2H logo there.
Click Program Guide & Esc > Press OK / Info alternately > When there logo will not found on pressing OK (at time of channel list shows on press ok bttn) or when you press menu. (Check this thing at least 3-4 times) After you confirm the logo is disable again go to satellite management > scan channels > save those & Press exit. Now the logo will disable.
Go to tarang music on 790. Press active services button & after few second press exit. Now u can watch the channel but maybe with bord of subscription end error.
To enjoy with less disturb choose menu language hindi & enjoy.
Message logo looks nice on info bar but it disturbs when its on top right side of screen.
Manually lock a channel & tune it once & tune another channel which you want now logo will disappear. When you use any menu function it will appear, repeat same procedure to hide logo.
how to hack windows xp password without any software
- Start your computer.
- After all the process & services have been loaded, in the "USER LOGIN" press CTRL+ALT+DEL.
- There a window pops out asking the username & password.
- In the user name type "Administrator" & in the password type nothing.
- press enter or ok.
FOR INDIAN LIVE TV CHANNELS YOU CAN
DOWNLOAD THESE APP
THIS APP ARE ABSOLUTELY FREE
NO EXTRA CHARGES
No comments:
Post a Comment